In this post:
What Are Buffer Solutions?
Ranging from pH 1 to pH 12, at ReAgent we offer multiple buffer solutions to suit your needs. Prepared in our facilities to high standards, our buffer solutions contain a weak acid or weak base and the respective conjugated base or acid. The main objective of these solutions is to prevent a great pH variation when strong acids or bases are added. This buffering ability is achieved via the equilibrium between the acid (HA) and its conjugated base (A-), according to the reaction:
HA H+ + A-
Le Chartelier’s principle
According to this principle, if a strong acid is added to a buffered solution, or in other words containing a weak acid and its conjugated base, pH is not significantly altered and the above reaction only moves slightly to the left. As a result, the H+ concentration (which determines how acidic a solution is) increases less than what would be expected due to the amount of acid added. Following a similar process, adding a strong base consumes much less H+ than anticipated. In the absence of the buffer, adding a strong acid or base would seriously alter the solution’s pH.
Inside the comfort zone
For every buffer solution, there’s a comfort zone when the concentration of acid (HA) is in equilibrium with the concentration of its conjugated base (A-), or in other words [HA]=[A-]. Within this zone, it shows the best buffering capacity. For example, if a strong base is added, the H+ concentration is only marginally reduced as most of the OH- is consumed in the following reaction:
OH- + HA → H2O + A-
Only a small proportion is used in the reaction that actually alters the pH (neutralisation reaction):
OH- + H+ → H2O
Outside the comfort zone
Buffering solutions are only valid within a certain pH range, and once either the upper or lower limit is crossed (the acid present reaches over 95% deprotonation), the solution is no longer protected and adding a strong acid or base will result in considerable pH changes. This is usually associated with colour changes in the solution for easy identification.
Solutions vs. powder sachets
Although ready-made solutions are still the most popular option, offered by ReAgent in multiple sizes from a few ml to bulk containers, many laboratories now prefer to use powder sachets. These products offer significant advantages, including smaller, lighter and easier to transport and store; as well as a longer shelf-life. At ReAgent you can find buffer powder sachets in pH 4, 7 and 9.2.
The blog on chemicals.co.uk and everything published on it is provided as an information resource only. The blog, its authors and affiliates accept no responsibility for any accident, injury or damage caused in part or directly from following the information provided on this website. We do not recommend using any chemical without first consulting the Material Safety Data Sheet which can be obtained from the manufacturer and following the safety advice and precautions on the product label. If you are in any doubt about health and safety issues please consult the Health & Safety Executive (HSE).